Home > Blog

Power Tools Cutting Machine maintenance instructions

Post Time: 2016-06-23

Cutting Machine
Check Before Working
1) Check the housing, the housing can not be damaged.
2) Check the cutting blades, cutting blades should be not damaged. Inspection method: observation with eyes that cutting blade should no gap or crack.
3) Check the cutting disc guard should be firmly intact.
4) Check the cable, plug must not damage.
5) Before the power is turned on, view the supply voltage meets the requirements, switch to the OFF (OFF) position.
Operating Requirements:
1) The operator should wear appropriate protective equipment, such as anti-splash mask, cut-resistant gloves.
2)the workpiece it should be fastened before cutting , do not allowed to hold workpiece with hand
4) is strictly prohibited after cutting, with cutting blades grind the workpiece side.
5) When moving, be careful for power lines, preventing power cord torn bad.
6) Never operate in the dismantling of the cutting shield
7) Check the circuit once a week.
8) When the power supply grid temporary outage, it should be taken away from the power supply in order to prevent accidental starting motor. Turn off the power when not use it. .