Home > Blog

Power tool hammer drills maintenance instructions

Post Time: 2016-06-24

Drill / Hammer
Before check working:
1) Before use, carefully check the grounding wire and other protective devices.
2) Check whether the smooth rotation of the moving parts, whether there are parts failure.
3) Before use, check the wires and sockets. If damaged, repaired by qualified professionals.
Operating Requirements:
1) wear appropriate protective equipment, operation will generate a lot of dust in the work shall wear a dust mask.
2) the workplace must be kept clean and tidy. Disorganized easily lead to accidents, pay attention to environmental factors, not to allow power tools exposed to rain, do not use power tools in damp places. Do not use power tools in / near flammable liquid gas. Workplaces must have sufficient lighting.
3) Beware of electric shock. Avoid touching the body grounded objects such as pipes, equipment, and other work.
4) Do not let the job has nothing to do with the staff or the machine touch the wire, and do not permit such persons to enter the working range.
5) Electric tools wire must be placed behind the body, away from the drill bit.
6) Use the appropriate performance of the machine, do not let machine supercharged, the machine should follow the calibration rate.
7) Do not wear loose clothes or accessories, such articles, these things may be drawn into the machine at the time of the job.
8) do not lift the machine by pulling the wire, do not take the plug by by pulling the wire. the machine must be away from heat, oil and blade.
9) fixed the material to be processed. Using a fixed device or vice fixed processing materials.
10) stand stable to avoid an unstable posture operate the machine.
11) Do not let the tool wrench left on the machine.
12) Beware of unexpected start the machine. When lift the machine is plugged in, you must not put your hands on the key to open. Must be determined the machine's power switch is off before power is turned on.
13) remain vigilant at all times, the work should keep a clear head, if you can not concentrate, do not use the machine.
16) Power Tools should be repaired by professionals.