Lawn Mower Machine maintain-3
Post Time: 2016-08-02
First, let go of the fuel tank and the engine gasoline engine until it runs out of fuel and shut down;
Secondly, in just under a heat engine shutdown state, first let go
crankcase oil, then the recommended levels add new oil in a suitable
scale;
Third, remove the spark plug, the cylinder was dropped to 5-10 ml of oil, turn the crank a few laps, and put on the spark plug;
Fourth, cleaning cutter, body, cylinder, cylinder head fins, wind shield, net enclosures and mufflers around the dust and debris
Fifth, it should be stored horizontally in the ground, with Covers prevent dust falling on the mower.
Sixth, thoroughly clean the lawn mower. Before
long idle winter lawn mower, lawn mower should be thoroughly cleaned
the bottom of the deck and the fuel tank cap, in order to avoid residues
of agricultural weeds and mud caused by erosion. Before
cleaning, remove the spark plug and the need Opener, hose, putty knife,
automotive cleaners remove accumulated impurities from the landing gear
and deck. Brush with the holes on the removal of sediment mailbox avoid holes plugged.
Seventh, degreasing. Prolonged
exposure equipment grunge chemical reaction occurs, causing the paint
off the surface of the device, so the need for timely removal. When degreasing, degreasing agent is sprayed in the first equipment
where oil and let stand for 10-15 minutes, then wipe clean with a towel
to the last rinse water.
Eighth, the exposed part of the rust prevention mower. Available lubricants on the exposed part of the mower for spraying, can effectively prevent rust. The mower is placed in a dry place.
Ninth, periodic inspection consumable parts. Develop
the habit of regularly check the consumable parts, the timely
replacement of damaged parts, so not only can improve the performance
mower, but also to eliminate safety hazards.
rjjnicole