Install carbon brush application of electric-1
Post Time: 2016-07-20
Electric power tools are generally series motor,carbon Brush in which is a consumable accessories.It became a big key to install correctly.Brush installation should pay attention to the following matters: 1.Prohibit the installation of different brands and different materials in the same brushless motor.2.Special attention when installing the spring under the pressure is good, whether or hinder the use of brushes.3.Note that copper fixing bolts are fixed securely and whether the manner interfere with the use of brushes.4.Can not have oil, grease gets on the friction surface carbon brushes and rotating parts. Matters instructions before use:1.Brush the run(CW)Brush friction surface in contact with the rotating member to the friction surface completely.The transmission will be uniform current.Failure to carry out the work of the run, there will be a spark generated when the motor is running.Running the following ways:1)Natural Running:After installing the carbon brush,So that the natural run-in (different scenarios about 0.5-3 hours, depending on size) 2)Artificial Running:In the case of motor power to sandpaper the run work.
rjjnicole