Angle Grinder Safety Routine Maintenance(c)
Post Time: 2016-07-04
Use angle grinder process should Precautions1, the wheel must start 40 to 60 seconds grinding, grinding tools should stand before the speed is stabilized wheel side, not being on the wheel to prevent wheel broken pieces flying out of wounding.2, in the same piece wheel, they both prohibit the use, but are not allowed on the side of the grinding wheel, grinding, the operator should stand on the side of the angle grinder angle grinder, do not stand in front of the grinder, prevent wheel crack, the accident occurred at the same time is not allowed to wear gloves, non-operating reactors around and laughing with slapstick when grinding.3, standing position when the grinding should be at an angle grinder, and the contact pressure should be uniform, non-impact wheel, to avoid fragmentation, limited to grinding wheel cutter, you can not wear heavy iron material or thin and soft materials (aluminum, copper, etc.) and wood products.4, sharpening, the operator should stand on the side or inclined side wheel position, do not stand in front of the wheel, while the tool should be slightly higher than the wheel center position. Shall not apply excessive force to prevent slippage injured hand.5, grinding wheel are not allowed to touch water, should always be kept dry, wet water to prevent loss of balance after the accident occurred.6, does not allow a large grinding long objects in the grinder, grinding wheels flying wounding prevent shattering.7, can not single hand-held workpiece grinding, to prevent the loss in the shield card broken wheel.Third, the use of angle grinders Notes1, we must often face grinding wheel dressing, when found in the tool severe beating, they should promptly be trimmed with a diamond pen.2, grinding wheel wear thin, small mill, the use of serious wear and tear, are not allowed to use, should be replaced to ensure safety.3, the grinding is complete, turn off the power, do not let idle angle grinder, while the shield should always clear the dust, regular maintenance and replace the spindle grease.
for more spare parts please click
here
rjjnicole