Angle Grinder Safety Routine Maintenance(b)
Post Time: 2016-07-04
Using1. Before use be sure to check whether the angle grinder with protective cover, protective cover is securely, and angle grinder grinding installation firm.2. Do not use the existing incomplete grinding wheel, should be cut to prevent Mars scattered, to prevent splashing others, and away from flammable materials.3. To bring protection goggles, put on the right clothes, do not wear loose clothes, not to wear jewelry or long hair, is strictly prohibited to wear gloves and cuff buckle and not operate.4. When you have a greater swing angle grinder just opened, should be forced to hold steady.5. After opening the switch, wait until the wheel is in motion to work after stabilization.6. The cutting direction is not toward the person.7. After half an hour of continuous work to stop five minutes, let it cool before using. After long-term use, the machine should be run for a short time at idling speed in order to cool the motor.8. Use the angle grinder to cut or grind when the grinder handle hold steady even force.9. can not catch small parts on hand angle grinder for processing.10. When there is abnormal sound or vibration or excessive leakage, should immediately stop inspection; repair or replacement must first cut off the power before fitting, and the like blade stops completely.11. When using a cutting machine such as working in a humid place, must stand on an insulating mat or dry wood were. Or climb in the explosion dangerous area must use proper safety precautions.12. The angle grinder brushes as consumables, after a period of time to pay attention to replacement. Note that allowed good contact when replacing.13. A power outage, a break or leaving the workplace, should immediately cut off the power.maintenance 1. Always check the power cable is securely connected, plug is loose, the switching operation is flexible and reliable.2. Check the brushes wear too short, timely replacement of the brush to prevent the brush due to poor contact to form a spark is too large or burned armature.3. Note that the inspection tool, the outlet can not be blocked, and any parts of the oil removal tool and dust.
for more spare parts please click here
rjjnicole