How to maintain the use of small gasoline generators(c)
Post Time: 2016-08-17
Third, fire, engine ignition
Useful ignition engine starter solenoid battery connection by wiring the electric starter to start the engine and with a magneto ignition. Note that when using the battery ignition, should be used in 12V / 35A battery above, and after the demolition of the positive and negative connection, and pay attention to the electric starter wiring, battery positive first pick, followed by the negative electrode, and the ground wire to the rear end of the generator section, when the release wire, release the negative, then release the positive electrode. With magneto ignition, platinum should be noted that the breaker gap, due to the long-term point of contact caused by burning off and stained with dirt, so that the gap becomes larger or smaller, if the ignition is not normal, usable No. 0 sandpaper, clean touch point surface, if the gap is too large platinum or too small adjustable opening to a minimum gap of 0.02-0.05mm. Practical application that can be used a conventional cigarette paper shell into the opening gap after platinum back and forth freely to drag the thickness shall prevail. In this case, the outer cylinder ignition system test, which should spark and jump over 6-8mm, purple-white spark better.
rjjnicole