Maintenance and repair methods using gasoline generators(b)
Post Time: 2016-08-17
Third, pay attention:
To prevent injury, when replacing the oil filter, pay attention to a hot oil spill.
Air Filter Maintenance Dirty air filters cause starting difficulties
occur, causing loss of power, the engine malfunction, and shorten engine
life.
Air filter to keep clean. In larger environments dust, the air filter to filter more frequently replaced. Remove
the cock and the air cleaner cover, paper will be able to remove the
air filter element and internal urethane foam external components. When installed, the paper element and urethane foam on the air filter base. Check the gasket is in position, and then attach the lid, and tighten the tap.
Every 50 hours to clean or replace the urethane foam again. (Dust in the larger environment will more frequently.)
First, clean the filter, When cleaning, gently tap filter to remove sediment and air compressor to blow off the dust nozzle. Do not use oil. Every 50 hours to clean or replace the filter once. Every 200 hours, or to replace the filter once a year.
Second, spark plug cleaning and adjustment
(A) Disconnect the spark plug cap.
(B) the use and distribution of a spark plug wrench and handle, counterclockwise rotation until the spark plug unloaded so far.
(C) cleaning the spark plug mounting hole four weeks.
(D) If the electrodes are dirty, it is necessary for cleaning. Clearance adjustment in 0.7 to 0.8 mm. If the wear is very serious, some have not raised flat surface, then we should replace a new spark plug. If the electrode is black, also check the air filter.
(E) to the specified torque and tighten the spark plug. 25 to 30Nm (2.5 to 3.0Kg-m)
Contact portion (f) If the spark plug cap internal corrosion is not found, the high-voltage wire connected.
rjjnicole