Gasoline Generator working principle(e)
Post Time: 2016-08-17
Maintenance Method Editor
Gasoline Generator
New generator or archived by the generator after running the operation
(first 50 hours), you need to perform the following tasks:
Clean or replace the air filter
Replacing the engine oil
Lubricating oil filter replacement or cleaning of the filter
Re-tighten the bolts and take the parts
The
new generator should try to avoid a sudden increase in load or
high-speed operation, try to use the manufacturer's recommended use of
lubricants, different grades of lubricating oil do not mix, lubricating
oils contain various additives, lubricant mixing different grades will
after lubricating performance, causing abnormal wear of moving parts.
When
the fuel tank to the fuel injection, the fuel inlet filter should be,
put a cloth better; first to the fuel in the tank to stand for more than
24 hours to allow the use of water and impurities after precipitation;
daily peacetime should always open the tank drain plug head discharging water and sediment at the bottom.
Regular
maintenance and planned maintenance is the key to prolong engine life,
maintenance cycle and maintenance projects to make appropriate
adjustments depending on the application, usage and fuel, lubricating
properties, if necessary, to advance maintenance, as far as possible by a
professional technical staff to complete regular inspection and maintenance.
Quality
imported generators are often valuable, rational use, pay attention to
routine maintenance, prevention of early wear and prolong its life,
allowed to keep a good jump start and inputs prepared machine state,
truly the best use. [1]
rjjnicole